Siemens SITRANS F US - 1.3 Precision measuring system; 1.4 Literature overview; 1.5 System overview

SITRANS F US Clamp-on Communications Module
Compact Hardware Installation Instructions, 2/2014, A5E32586525-AD
5
Introduction
1
These SITRANS F US Clamp-on Communications Module installation instructions are for
Siemens SITRANS F US clamp-on ultrasonic flow meters.
The instructions are aimed at persons that mechanically install the device, connect it
electronically, configure the parameters and commission it as well as service and
maintenance engineers.
Note
It is the responsibility of the customer that the instructions and directions provided are read,
understood and followed by the relevant personnel before installing the device.
Note
For complete Safety Considerations and Ratings, refer to the Operating
Instructions manual
included with the unit.