Siemens Sitrans LR250 - CE and UKCA Electromagnetic Compatibility (EMC) Conformity; Improper Device Modifications

Safety information
2.2 Improper device modifications
SITRANS LR250 with FOUNDATION FIELDBUS
Compact Operating Instructions, 09/2021, A5E48453221-AB
13
2.1.9 CE and UKCA Electromagnetic Compatibility (EMC) Conformity
This equipment has been tested and found to comply with the following EMC Standards:
EMC Standard
Title
CISPR 11:2009 + A1:2010/EN
55011:2009 + A1:2010, Class B
Limits and methods of measurements of radio dis-
turbance characteristics of industrial, scientific, and
medical (ISM) radio-frequency equipment.
EN 61326:2013
(IEC 61326:2012)
Electrical Equipment for Measurement, Control and
Laboratory Use – Electromagnetic Compatibility.
EN61000-4-2:2009
Electromagnetic Compatibility (EMC) Part 4-2: Testing
and measurement techniques – Electrostatic dis-
charge immunity test.
EN61000-4-3:2006 + A1:2008 + A2:2010
Electromagnetic Compatibility (EMC) Part 4-3: Testing
and measurement techniques – Radiated, radio-
frequency, electromagnetic field immunity test 2006
+ A1:2008 + A2:2010.
EN61000-4-4:2004 + A1:2010
Electromagnetic Compatibility (EMC) Part 4-4: Testing
and measurement techniques – Electrical fast transi-
ent/burst immunity test.
EN61000-4-5:2006
Electromagnetic Compatibility (EMC) Part 4-5: Testing
and measurement techniques – Surge immunity test.
EN61000-4-6:2010
Electromagnetic Compatibility (EMC) Part 4-6: Testing
and measurement techniques – Immunity to conduct-
ed disturbances, induced by radio-frequency fields.
EN61000-4-8:2010
Electromagnetic Compatibility (EMC) Part 4-8: Testing
and measurement techniques – Power frequency
magnetic field immunity test.
2.2 Improper device modifications
WARNING
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
• Only carry out modifications that are described in the instructions for the device. Failure
to observe this requirement cancels the manufacturer's warranty and the product
approvals.