Operation
7.3 Menu system
SITRANS SL
124 Operating Instructions, 12/2010, A5E01132948-04
Analog input test
Select input to monitor
● Analog temperature input
● Analog pressure input
The current reading for the selected input is displayed and continuously updated.
Digital input test
Sitrans SL provides one configurable binary input for quality information of external sensors.
This binary input is mapped within the application software to input 0 and input 1. Both inputs
are displayed and continuously updated.
Relay test
The test mode will override the actual output values of the analyzer. The user is asked for a
confirmation before test mode is entered.
The two relays are represented by check boxes, where X represents an active signal on the
relay (i.e. relay de-energizes)
View spectrum
Displays the spectrum as a graph
To Next Page
Loading...
