System Handling Operation of the Patient Table
0.0
04/2012
0.0
C.2-7
0.0
C.2
✧ Press the table in key and hold it pressed until the table is
correctly positioned.
The table top moves towards the gantry. The new table top posi-
tion (in mm) is shown on the display.
C.2
or
C.2
C.2
✧ Press the Table out key and hold it pressed until the table is
correctly positioned.
The table top moves out of the gantry. The new table top posi-
tion (in mm) is shown on the display.
C.2
Moving to the predefined ta-
ble position
C.2
C.2
✧ Apply the predefined position keys A or B to move the
patient table into scanning position.
The table reaches the predefined positions preset from the
Siemens Service.
C.2
To Next Page
Loading...
