0.0
0.0
Constancy Test Quality Assurance
F.3-6 SOMATOM Spirit
0.0
F.3
✧ Press the Start key on the control box.
The phantom position and the gantry tilt are checked.
F. 3
i
.3
F
The system alerts you if the phantom is positioned incorrectly.
Correct the position, if necessary.
F. 3
The system then starts the first quality measurement. It is usu-
ally checking the Lightmarker position (z-positioning).
F. 3
Interrupting the constancy
test
F.3
You can interrupt each test within a constancy measurement.
F. 3
F.3
✧ Click the Cancel button.
The current measurement is aborted.
F. 3
To Next Page
Loading...
