Siemens US06-101.812.01.02.02 SONOLINE G20
10.04 sd
SONOLINE G20 System Delivery Procedure 13
Page 13 of 26
Medical Solutions USA, Inc.
6. Verify that the system boots to a blank screen.
Fig. 10: Blank Screen
NOTE
The boot sequence takes approximately 80 seconds, 150 seconds
if POST is set to run during the boot sequence. If the system does
not boot within 80 to 150 seconds, press STANDBY and wait for
the system to shut down. Verify that the power connections are
correct, and then boot the system. If system does not boot, report
this to the Siemens Uptime Service Center.
To Next Page
Loading...
