Siemens Synco 700 RMZ785 - Page 184

Reception zones Transmission zones
Inputs (N.X1…A8(2).X4) Inputs (N.X1…A8(2).X4)
Digital outputs (N.Q1…A8(2).Q5)
Analog outputs (N.Y1…A8(2).Y2)
Overview
Main menu > Commissioning > Communication > LTE reception zones >
Setting values
Operating line Range Factory setting
N.X1…A8(2).X4 ---, 1…4095 ---
Main menu > Commissioning > Communication > LTE transmission zones >
Setting values
Operating line Range Factory setting
N.X1… A8(2).X4
N.Q1…A8(2).Q5
N.Y1…A8(2).Y2
---, 1…4095 ---
You can simulate bus signals using the "Simulation inputs" function when
commissioning plants (see Section 5.1.3).
Note
185 / 216
Siemens Switching and monitoring device RMS705B CE1P3124en
Building Technologies Communication 01.04.2010