9 – 58
Connecting BSS module
The first cconnection leads to the secondary disconnect block X8. The second cconnection is made according to the
circuit breaker equipment.
Circuit diagrams (page 8-1)
(1) ETU745 - 776 without metering function
(2) ETU745 - 776 with metering function
(3) X51-X52 External conducted cubicle bus link does only exist in release 1. release 2 uses an internal link
9.2.2.2 COM15 module
Interface adapter for:
- converting csignals to PROFIBUS-DP signals and vice-versa
- for draw-out circuit breakers:
detecting the circuit breaker position in the cradle with auxiliary signaling switches S46, S47 and S48, and emitting the corre-
sponding signals to the cand the PROFIBUS-DP.
- providing special functions via additional inputs and outputs (e.g. to control the circuit breaker and for parameterization)
To Next Page
Loading...
