Siemens UL 1066 - Page 306

23 – 24
Frame size II
(1) Spacer
(2) Hex-head screw
800 A, 1600 A: M12 x 45,
2000 A: M12 x 55,
3200 A: M12 x 80,
3200 A: 4-pole version, N-pole bottom M12 x 80
(3) Belleville washer
(4) Threaded plate
(5) Washer
(6) 800 A, 1600 A, 2000 A: M12 nut
3200 A: threaded plate
(7) Vertical adapter
(8) Finger cluster
(9) Carriage bolt M12 with belleville washer and nut
4-pole versions: 
1600, 2000 A N-pole top and bottom: M12 x 60
3200 A, N-pole top: M12 x 75
A Construction Style A
B Construction Style B
NOTE
To achieve correct finger cluster position in frame size II, center the vertical adapter of the center pole (phase B) on the copper connector
of the frame and tighten it. Shift the vertical adapters (7) of the outer poles (phase A & B) outwards until the specified distance of 5 1/4" is
reached, and tighten them.
0640-5
(1)
(3)
(9)
(3)
(9)
(7)
(8)
(3)
(9)
(3)
(9)
(7)
(8)
B
B
(2)
(3)
(4)
(2)
(3)
(4)
(7)
(8)
0644-01
(1)
(2)
(3)
(4)
(2)
(3)
(5)
(6)
(7)
(8)
Only FS II (3200 A)
Only FS II (800, 1600, 2000 A)
A
A
Only FS II (800, 1600, 2000 A) Only FS II (3200 A)