9 – 26
"Contrast setting" mode
In this mode, the contrast of the display can be adjusted.
"Tripping info" screen
This mode will automatically be activated as soon as a trip occurs, provided an external 24 V DC voltage supply has been connected.
1)
Metering function
To access "Contrast setting" mode, press the following
button(s):
In "Autoscroll" mode
Screens displayed in "Contrast setting" mode
Screen 1
Contrast setting
The longer the bar, the higher
the contrast
Button functions in "Contrast setting" mode
Increases the contrast
Reduces the contrast
Accept the contrast,
switch to the "Autoscroll" mode
Screens displayed in "Tripping info" mode
Tripping type
Phase affected
XX may be:
L, S, I, G, N, M
1)
YY may be:
L1, L2, L3,
Button functions in "Tripping info" mode
Display of maintenance
instructions
If pressed again:
Switches back to "Tripping info"
mode
Press CLEAR button
Switches to "Autoscroll" mode
Contrast Adjust
0 50 100 %
+ - Enter
To Next Page
Loading...
