9 – 90
Terminal assignment
Settings
Changing settings (page 9-86)
Indicators
(page 9-86)
Testing
(page 9-86)
Terminal assignment of digital input module
X4 Inputs 4-6
X5 Inputs 1-3
Settings of digital input module
PROFIBUS DP INPUT
Inputs 1-6 are active.
If an input signal is present, a corresponding message is output via the
COM module to the respective fieldbus.
PARAMETER SWITCH Input 1 is used for parameter switchover. All other inputs have no function.
No input signal (LED 1 not lights up):
Parameter set A activated
Input signal available (LED 1 lights up):
Parameter set B activated
NOTE
The parameter switchover query can be overruled by a query via the PROFIBUS DP, Modbus RTU and Modbus TCP /
PROFINET IO-communication, the TD400 or the graphical display.
For further details please refer to "SENTRON 3WL / 3VL Circuit Breakers with communication capability - PROFIBUS DP”.
To Next Page
Loading...
