Maintenance
6-6
Operating instructions ULTRAMAT 23 gas analyzer
C79000-B5276-C216-03
6.2 Maintenance Work
!
Warning
Certain parts in this electrical device contain dangerous voltage during
operation.
Severe personal injury and/or damage to property may occur if the
power supply is connected incorrectly, if maintenance work is carried
out incorrectly, or if the warnings are not observed.
Correct and safe operation of this device is dependent on proper
transport, storage and installation as well as careful operation and
maintenance.
!
Warning
When working with toxic gases, ensure that no concentrations
dangerous to health can occur at the position of work. If the gas
connections are made incorrectly, accidents may occur as a result of
toxic, flammable or explosive gases.
!
Caution
The electronic components and modules fitted in this device must be
protected against electrostatic charges and discharging.
Comprehensive measures must therefore be made to protect them
wherever they are manufactured, tested, transported and installed.
!
Warning
Before opening the analyzer, disconnect all poles from the mains sup•
ply.
To Next Page
Loading...
