Appendix
9-6
Operating instructions ULTRAMAT 23 gas analyzer
C79000-B5276-C216-03
9.3 Software Release Versions
This Manual refers to the software release version 2.14._
(see Section 5.7.4). The most important modifications are listed below.
If analyzers are to be upgraded to the software version 2.14._, please
observe the listed measures.
Table 9-2 Measures for upgrading to version 2.14._-
Software
version
Manufac-
turing
period
starting
Most important innovations Measures for upgrading to
version 2.14._:
Replace ROM package
C79451-A3494-S501 and ...
0.24 ...
0.94
Up to
approx.
12/96
S Functionality c ompleted
(pre-production analyzers)
S Only possible in service
center!
Replace ROM package (flash
PROM) C79451-A3494-S501,
GAL
S New temperature adjustment
necessary
1.0 1/97
S Complete functionality with
German dialogs
1.1 1/97
S Internal correction
1.2 2/97
S Complete functionality with
German dialogs
1.3 2/97
S Internal corrections
1.4 2/97
S Complete functionality with
German, English, French,
Spanish Italian dialogs
1.5 3/97
S Signalling ”Function control”
introduced
S Analyzer status displays:
”Function control” instead of
”Maintenance” (see Section
5.2)
1.6 6/97
S Error correction in display ”O
2
cal after install date” (see
Section 5.8.2.1)
S In dialog ”Parameters: Time
constants” T90 instead of Tau
(T63) (see Section 5.9.3)
S Company name ”SIEMENS”
removed
S Internal corrections
S Check time constant
To Next Page
Loading...
