Environmental protection and saving
▶ Immediately remove all detergent
residues, spray residues or residues
upon contact with the device.
Reduce
washing temperature for
lightly and normally soiled laundry.
a
At low temperatures it consumes
device uses less energy. For light
to normal contamination, lower
temperatures than stated on the
care label are also sufficient.
M3 Environmental protection and
saving
environmental protection and saving
Environmental protection and saving
3.1 Disposal of the packaging
Set
the maximum speed if the
laundry is to be dried subsequently
in the tumble dryer.
The packaging
materials are
environmentally friendly and can be
reused.
▶ Dispose
of the individual
components separately by type.
a
Dryer laundry shortens the pro-
gram duration during drying and
reduces energy consumption. With
a higher spin speed, the residual
moisture in the laundry decreases
and the noise level of the spinning
increases.
3.2
Efficient use of energy
and resources
Wash laundry without prewash.
If
you follow these instructions, your
device will use less electricity and
water.
a
Extends washing with prewash
the program duration and increases
energy and water consumption.
Use
programs with low temperatures
and longer washing times and use
the maximum load capacity.
The
device has an automatic load
adjustment.
aThe
automatic load adjustment
ming optimally adapts water
consumption and program duration
to the type of textile and load
capacity.
aThe
energy consumption and water
consumption are the most efficient.
Dose detergent
according to the
degree of soiling of the laundry.
3.3 Energy saving mode
a
For a mild to normal degree
of contamination, a small amount
of detergent is sufficient. Follow the
dosage advice of the detergent
manufacturer.
If
you do not operate the device for a
long time, it will automatically switch
to energy saving mode.
The energy saving mode is exited
when you operate the device again.
12
To Next Page
Loading...
