EasyManua.ls Logo

Siemens WM14N208NL - Agent; The Ministry in Essence; Switching on the Device; Set Program

Siemens WM14N208NL
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Detergent and laundry care products
¡Laundry folded apart
do the drum
1.Turn the program selector and set
it to the desired program.
"Programs", page 24
2.Adjust the program settings if
desired.
"Adjust program settings", page
29
W1ash and laundry care products 2 Detergent and laundry detergent
care product
WIash and laundry care products information from the manufacturer about
usage and dosage can be found on the
packaging.
13.3 Adjust program settings
Comments
¡when using liquid detergent
only use self-flowing liquid
detergents ¡different liquid
detergents
do not mix
¡detergent and fabric softener
to blend
¡Not stored for too long and strongly in-
use thick products. ¡do not use
solvent-based
the, corrosive or gas-forming
agents
¡Use dyes in moderation,
Salt can damage stainless steel
¡no bleaching agent in the appliance
use ready
Required:
A program has been set.
"Set program", page 29
Adjust the program settings.
"Keys", page 23
Remark:The program settings are not
permanently saved for the program.
13.4
Fill the drum with laundry
Remark:To avoid
creasing, observe the
maximum load of the programs.
"Programs", page 24
D1e Operation in essence 3 The Operation in es-
Requirements
¡
The laundry has been prepared and
sorted.
"Laundry", page 28
¡The drum is empty.
sence
The Ministry in essence
13.1 Switching
on the device
Required:
The device is set up and
connected correctly.
"Setting up and
connecting", Page 13
1.Open the door.
2.
Place the laundry in the drum.
3.
Close the door.
Set the
program selector to a
program.
Make
sure that no small pieces of
laundry
are stuck in the door.
13.2
Set program
29

Table of Contents

Related product manuals