EasyManua.ls Logo

Siemens WM14N208NL - Safe Installation

Siemens WM14N208NL
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
1.4 Safe
installation
WARNING
‒ Risk of electric shock! Improper
installations are dangerous.
Only connect and use the device according to the information on
the rating plate.
Only connect the device to an alternating current mains via a
properly
installed earthed socket.
The protective earth system of the electrical domestic
installation
must be installed in accordance with the electrical regulations.
The installation must have a sufficiently large core diameter.
When
using an earth leakage circuit breaker, only use a type
with
the sign.
Never
power the device via an external switching device, for
example a timer switch or remote control.
If the device
is built-in, the mains plug of the mains connection
cable
must be freely accessible, or if free access is not possible,
an all-pole
disconnection device must be installed in the
permanently installed electrical installation in accordance with
the installation instructions.
When setting
up the device, ensure that the power cord is not
pinched or damaged.
Damaged insulation of the power cord is dangerous.
Never
bring the power cable into contact with hot appliance
parts or heat sources.
Never
bring the power cord into contact with sharp points or
edges.
Never
kink, pinch or alter the power cord.
WARNING ‒
Risk of fire!
Using
an extended power cord and unauthorized adapters is
dangerous.
Do
not use extension cords or multiple sockets.
Use only
adapters and power cords approved by the
manufacturer.
5

Table of Contents

Related product manuals