The Ministry in essence
4.Slide the detergent drawer into the
appliance.
13.10
Soaking laundry
Remark:No additional detergent is
required.
The soapy water is then used
for washing.
13.8 Starting the program
1.Start the program.
Required:
A program has been set.
→
"Set program", page 29
2.To pause the program, press after
approx. 10 minutesStart Refill .
▶ OnStart Refillto press.
3.
To resume the program after the
desired soaking time, press Start
Refill .
a
The drum turns and one finds
load recognition takes place, which
can take up to 2 minutes and then
the water flows into the device.
aThe display shows the program
duration or the program end time. a
After the end of the program it shows
display: "End" .
13.11
Loading laundry
After
starting the program, you can
remove or add the laundry
depending on the program status.
1.
OnStart Refillto press.
13.9
Change activated
program end time
The
device pauses.
Remark:If you want to add laundry,
follow the instructions on the
display.
→
"Display", page 22
You can change the set and changed
program end time several times
before starting the program.
2.
Open the door.
3.
Add or remove the laundry.
4.
Close the door.
5.
OnStart Refillto press.
Requirements
¡The program is set.
→
"Set program", page 29
¡The program end time is set
and activated.
→
"Keys", page 23
13.12 Program Cancel
1.
OnStart Refillto press.
2.
Open the door.
1.
OnStart Refillto press.
The activated program end time is
paused.
At high temperatures and high
water
levels, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperatureTo rinse .
– Start the program at a high water
levelCentrifuge or select a
suitable program for draining.
→
"Programs", page 24
2.On Ready inuntil the desired
program end time appears on the
display.
3.
OnStart Refillto press.
The changed program end time is
activated.
31
To Next Page
Loading...
