Tests
T8
etching
Tests
TD
etching
The
selection of the program settings depends on the setting
program.
Knob
Start
Refill
Choice More
information
¡start
¡Cancel
¡pause
Start, cancel or pause program.
vario Speed ¡activate
¡deactivate
Activate or deactivate shortened
program duration.
Remark:
Energy consumption is
increasing. The washing result is
therefore not affected.
Ready in up to 24 hours Define
the program end time. The
program duration is already included
in the set number of hours.
After the start of the program, the
program duration is displayed.
°C Temp.
Centrifuge
- 90 Adjust
the temperature. Set
temperature in °C.
– –
– - 1400 Adjust the spin speed or
– – – Activate (rinse hold). Set spin
speed in rpm. With the selection – – –
the water is not drained at the end of
the washing cycle and the spinning is
deactivated. The laundry remains in the
rinse water.
3 sec.
Prewash
¡
activate
¡
deactivate
→
"Child lock", page 32
¡activate
¡
deactivate
Activate or
deactivate prewash, e.g. for
washing heavily soiled laundry.
Extra water
&
to rinse
¡activate
¡deactivate
Wash with more water and activate or
deactivate an extra rinse cycle.
Recommended for particularly
sensitive skin or in areas with very soft
water.
23
To Next Page
Loading...
