Set up and connect
O4
set up and connect
the device. The stains disappear
after the first wash.
Set up and connect
Set up and connect
4.1 Unpacking the device
The delivery consists of: ¡
Washing machine
¡
Accompanying documents ¡
Transport protections
→
"Remove transport locks", Page
14
¡Covers
¡
Bend piece for attaching
the water drain hose
NB!
Objects
left in the drum that are not
intended for use with the appliance
can cause damage to property and
equipment.
▶ Remove all these items and the
supplied accessories from the drum
before use.
4.3 Requirements
regarding the
installation location
1.
Completely remove packaging
materials and protection from the
device.
WARNING
Risk of electric
shock!
The
device contains live parts.
Touching live parts is dangerous.
▶ Do not use the device without a
cover plate.
→
"Disposing of the packaging",
Page 12
2.Check the device for visible
damage.
3.
Open the door.
4.
Remove the accessories from the
drum.
WARNING
Risk of injury!
When used on a pedestal, the device
may tip over.
▶ The device feet for commissioning
must be placed on a base absolutely
with the mountings
→
Page 28
confirm from the
manufacturer.
5.
Close the door.
4.2
Contents of the package
After
unpacking, check all parts for
transport damage and the
completeness of the delivery.
NB!
Operation with incomplete or
defective accessories may impair the
operation of the device or cause
material damage and damage to the
device.
▶ Do not use the device with
incomplete or defective accessories.
▶ Replace accessories before using
the device.
→
"Accessories", page 28
NB!
Freezing residual
water in the device
can damage the device.
▶ Do not place or use the device in
frost-sensitive locations or
outdoors.
If the device is tilted more than 40°,
residual water can escape from the
device and cause material damage.
▶ Tilt the device carefully.
▶ Transport the
device upright.
Remark:
The device has been checked
at the factory for correct operation.
This can cause water stains
13
To Next Page
Loading...
