Transport, store and dispose of
18.1
Emergency release
6.
Dismantle the hoses.
Unlock
door
19.2
Installing transport protection
devices
Required:
The drain pump is empty.
→
Page 35
To avoid transport damage, secure
the device with transport locks before
transport.
1.
Remove the 4 covers using a
screwdriver.
1.NB!Running
water can lead to
property damage.
▶ Do not open the door if water is
visible behind the glass.
Pull the
emergency release
downwards using a tool and
release it.
Keep the covers.
2.
Install the 4 transport locks.
→
"Remove transport locks", Page
14
aThe door lock is unlocked.
2.Place the service flap
and click it into
place.
3.
Close the service flap.
19.3
Putting the device back
into operation
T1transport, store and dispose of 9 Transport, storage
▶ For
more information, see
→
"Setting up and
connecting", Page 13
and
→
"Start the washing cycle
without laundry", Page 20
.
beat
and remove
Transport, store and dispose of
19.1 Dismantling the
device
1.
Close the tap.
2.Empty
the water supply hose.
3.
Turn off the device.
→
"Switch off device", page
32
4.Unplug the appliance
unplug.
5.
Leave the soap
→
"Drain pump
clean Page 35
walk away.
igen",
49
To Next Page
Loading...
