Siemens WM14N208NL - Changing Basic Settings; Program Counter; Calling up Program Counter; Cleaning and Maintenance

Program counter
15.2 Change basic settings
R1
cleaning and maintenance
7 Cleaning and maintenance
loves
1.Set the program selector to
position 1.
RR
cleaning and maintenance
clean and maintain your device
carefully to ensure that
it continues to
work well for a long time.
17.1
Clean drum
CAREFULLY
Risk of injury!
Permanent washing at low
temperatures and lack
of ventilation
of the appliance can damage the
drum and cause injuries.
▶ Regularly run a drum cleaning
program or wash at temperatures
of at least 60°C.
▶ Allow the appliance to dry with the
door and detergent drawer open
after each use.
2.
Press
simultaneously set the program selector to
position 2.
Start Refill and turn
a
The display shows the current value
the on.
3.
Set the program selector to the
desired position.
→
"Overview of the basic settings",
Page 33
▶ The programClean drumwithout
laundry and with a cleaning agent
to maintain the interior of the
appliance
→
"Accessories", page 28 or with a
bleach-containing powder
detergent.
4.
Press Ready infor the true
to change.
5.
Turn off the device to save the
change.
P1
program counter
6
Program counter
17.2
Cleaning the detergent
drawer
PD
program counter
The
program counter shows the number
terminated programs again.
1.
Pull out the detergent drawer.
16.1
Calling up program
counter
1.
Set the program to position 1.
2.
OnStart Refillpress and
same program at position 2
Set up.
3.
Set the program a to position 5.
34