Display
Indication
End
Description
Program
end
Program status
¡
lights up: the child lock is activated.
¡flashes:
the child lock is activated and the device
was served.
→
"Deactivate child lock", page 32
The prewash is activated.
→
"Keys", page 23
Wash with extra water and a rinse cycle is activated.
→
"Keys", page 23
Shortened program duration is activated.
→
"Keys", page 23
flashing: drum cleaning required. Run the Drum Clean
program to clean and maintain the drum and the lye
container.
→
"Clean drum", page 34
lights up: the voltage control system has paused the
program due to unauthorized voltage undershoots. The
tension is restored and the program continues.
Remark:The program duration is extended.
flashing: the voltage control system has
paused the
program due to unauthorized voltage undershoots.
Remark:The program will continue when the voltage
returns to normal.
¡
lights up: the door is locked and cannot be opened
pend.
¡flashing: the door is not closed.
¡off: the door is unlocked and can be opened.
¡No
water pressure.
¡
The water pressure of the tap is too low.
E:35 /
-101
1Example
Error code, error indication, signal.
→
"Troubleshooting", page 39
22
To Next Page
Loading...
