Set up and connect de
3. Tighten the lock nuts hand-tight
against the housing with an SW17
wrench.
Hold the device base firmly and
do not adjust the height.
4.7 Connect the device
electrically
Note: Note the information on
security
→
page 4
and avoid property damage
the →
Page 11,
to use your device
safely.
1. Plug the power cord of the device
into a socket near the device.
The connection data of the device
can be found in the technical data
→
Page 78.
2. Check that the power plug is firmly
seated.
19th
To Next Page
Loading...
