de Home Connect
16.2 Device with WLAN home
network (Wi-Fi) with
Connect the WPS function
5. Connect the device to the Home
Connect app. →
Page 51
16.3 Device with WLAN home
network (Wi-Fi) without
Connect the WPS function
Use the WPS function of your router
to connect the device to the home
network.
Pre-condition: If your router
If your router does not have a WPS
function, you can manually connect
the device to the WLAN home network
(Wi-Fi). The device briefly sets up its
own WLAN network. You can connect
a mobile device to the WiFi network
and transfer the network information
from the WiFi home network (WiFi) to
your device.
has a WPS function, you can
automatically connect the device to
the WLAN home network (Wi-Fi).
1. Press for about 3 seconds.
a The display shows Aut.
2. Press.
3. Press the WPS button on the
router within 2 minutes.
Pre-condition: The Home Connect
Note the information in the
documentation for your router.
a flashes in the display.
a The device tries the
To connect to the home Wi-Fi network.
a When the display con shows and
lights up continuously, the device
is connected to the home network.
The app is open and you are signed
in.
1. For at least 3 seconds
to press.
a The display shows Aut.
2. Set the program to position 2.
a The display shows SAP.
3. Press.
a Flashes in the display
a The device sets up its own
WLAN network with the network
name (SSID) HomeConnect ".
.
4th If the display shows Home
Connect Error, the device is not
connected to the home network.
- Check whether the device is
within range of the home
network.
- Reconnect the device to the
WLAN home network (Wi-Fi) with
WPS function.
4th Call up WLAN settings in the
mobile device.
50
To Next Page
Loading...
