Siemens WM14UP40 - Buttons

de Keys
T 7 buttonsbranches
T The selection of the program settings depends on the set program. You can see
the selection options for each program in the
branches
view for
→ "Programs", page 29.
button selection description
(Start pause) ¡ start
¡ abort
¡ pause
Start, cancel or pause the program.
Speed ¡ activate
¡ deactivate
Activate or deactivate washing with
reduced time.
Note: The energy consumption
increases.
This does not affect the washing
result.
i-Dos ¡ activate
¡ deactivate
¡ Basic dosing
lot
Briefly press the button to activate or
deactivate the intelligent dosing
system for liquid detergent.
If you press the button for approx. 3
seconds, you can set the basic dosage.
→ "Intelligent Dosing System",
Page 48
i-Dos ¡ activate
¡ deactivate
¡ Content of the do-
hopper
¡ Basic dosing
lot
Briefly press the button to activate or
deactivate the intelligent dosing
system for fabric softener or liquid
detergent.
If you press the button for approx. 3
seconds, you can determine the
content of the dosing container or set
the basic dosing amount.
→ "Intelligent Dosing System",
Page 48
/ (Completed in) 1 - 24 hours Determine the end of the program.
The program duration is already
included in the set number of hours.
After the program has started, the
program duration is displayed.
Note: Use the buttons to adjust
setting values.
- 90 ° (temperature
rature)
- 90 ° C Adjust the temperature in ° C.
26