Siemens WM14UP40 - Basic Settings; Overview of the Basic Settings; Change Basic Settings

de Basic settings
G 1round settings 7 basic settings
G S.round settings You can adjust your device to your needs.
17.1 Overview of the basic settings
Here you will find an overview of the basic settings of the device.
Basic
position
symbol value description
End signal 0 (off)
1 (quiet)
Adjust the volume of the signal
at the end of the program.
2 (medium)
3 (loud)
4 (very
according to)
Key signal 0 (off)
1 (quiet)
2 (medium)
3 (loud)
4 (very
according to)
Adjust the volume of the signal
when selecting the buttons.
Automatically
Switch off
4th On
OFF (off)
Activate or deactivate the
automatic switch-off of the device.
→ "Save energy and resources
ren ", page 12
Note: The device does not turn off
automatically when Wi-Fi is
enabled.
Drum cleaning
memory
tion
On
OFF (off)
Activate or deactivate the reminder
for drum cleaning.
Display bright
speed
1 (low)
2 (medium)
3 (high)
Adjust the brightness of the
display.
4 (very
high)
17.2 Change basic settings
2. To set the required basic setting,
press the button.
1. To set the basic settings, press the
button.
a The display shows the set
Basic setting and the current
value.
54