Transport, storage and disposal de
3. Insert all screws of the 4 transport
locks and tighten slightly.
20.3 Put the device into
operation again
1. Remove the transport locks.
2. Pour approx. 1 liter of water into
the manual dispensing chamber in
the detergent drawer.
3. The program Pumping out start.
a The detergent can be used the next
After washing, do not flow
unused into the drain.
4th Insert the mains connection cable
into the holder and remove all 4
Tighten the screws of the transport
locks with an SW13 wrench .
20.4 Dispose of the old device
Valuable raw materials can be
reused through environmentally
friendly disposal.
WARNING
Risk of damage to health!
Children can lock themselves in the
device and endanger their lives.
▶ The device is not behind a door
that blocks or prevents the
appliance door from opening.
▶ For disused devices the
Unplug the power cord, then cut
through the power cord and
destroy the lock on the appliance
door to such an extent that the
appliance door no longer closes.
5. Insert the hose into the holder.
1. Pull out the plug of the power
cord.
2. Cut through the power cord.
3. Dispose of the device in an environmentally friendly
manner.
You can obtain information about
current disposal routes from your
specialist dealer and from your
local authority.
75
To Next Page
Loading...
