Cleaning and care de
10. Clamp the drainage hose into
the holder.
2. Clean the interior, the thread of the
pump cover and the pump housing.
Clean the drain pump
3. Make sure that the impeller of the
drain pump turns
leaves.
Note: Note the information on
security
→
page 4
and avoid property damage
the →
Page 11,
to use your device
safely.
4th Insert the pump cover and close it
as far as it will go.
Pre-condition: The drain pump
is empty. →
Page 57
90 °
1. As there may still be residual water
in the drain pump, carefully
unscrew the pump cover.
The handle of the pump cover
must be vertical.
5. Insert the maintenance flap and click
into place.
1
2
59
To Next Page
Loading...
