General safety summary
V
General Safety Summary
Review the following safety precautions to avoid injury and prevent damage to
this product or any products connected to it. To avoid potential hazards, use this
product only as specified.
Only qualified personnel should perform service procedures.
1. To Avoid Fire or Personal Injury
● Use Proper Power Cord. Use only the power cord specified for this product and
certified for the country of use.
● Connect and Disconnect Properly. Do not connect or disconnect probes or test
leads while they are connected to a voltage source.
● Ground the Product. This product is grounded through the grounding conductor
of the power cord. To avoid electric shock, the grounding conductor must be
connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
● Connect the Probe Properly. The probe ground lead is at ground potential. Do
not connect the ground lead to an elevated voltage.
● Observe All Terminal Ratings. To avoid fire or shock hazard, observe all
ratings and marking on the product. Consult the product manual for further ratings
information before making connections to the product.
● Do Not Operate Without Covers. Do not operate this product with covers or
panels removed.
● Use Proper Fuse. Use only the fuse type and rating specified for this product.
To Next Page
Loading...
