Laboratory centrifuge Sigma 2-7, Sigma 2-7 Cyto
Laboratory centrifuge Sigma 2-7 IVD
Version 07/2015, Rev. 1.12 of 16/07/2019 • sb
Translation of the original operating manual, part no. 0702802
Sigma Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode (Germany)
Connection requirements
Electrical connection:
Protection class:
IP code:
Max. connected load (kVA):
Max. power consumption (kW):
Max. current consumption (A):
Input fuse (AF):
0.26 (at 100-240 V / 50/60 Hz)
0.21 (at 100-240 V / 50/60 Hz)
2.6 (at 100-240 V / 50/60 Hz)
6.3 (at 100-240 V / 50/60 Hz)
Performance data
Max. speed (rpm):
Max. capacity (ml):
Max. gravitational field (x g):
Max. kinetic energy (Nm):
400 – 2,000
400
635
1,821
Other parameters
Time range (min):
1 – 99, short run, continuous run
Physical data
Height (mm):
Height with opened lid (mm):
Width (mm):
Depth (mm):
Weight (kg):
10.1 Ambient conditions
• The figures are valid for an ambient temperature of +23°C and a
nominal voltage 10 %.
• For indoor use only.
• Allowable ambient temperature +5°C to +40°C.
• Max. permissible relative humidity 80% from 5°C to 31°C, with a linear
decrease to 50% relative humidity at 40°C.
• Maximum altitude 2,000 m above sea level.
10.2 Technical documentation
For environmental reasons, the comprehensive technical documentation of
the centrifuge (e.g. circuit diagrams) and the safety data sheets of the
manufacturers of refrigerants and lubricants are not attached to this
documentation.
You can order these documents from our service department.