Sigma RC 1209 - Setting the Training Zone

51
GB/US
5.5.11 SETTING TRAINING ZONE
You can choose from three training zones. The upper and lower limits
for the zone alarm are determined by the zone that you select.
Example: You want to lose weight. Select the “Fat Burning” zone.
Prerequisite: Your running computer is in the setting mode.
5 SETTING MODE
Press PULSE (-) button repeatedly until “Train. Zone”
appears on the display.
Press SET button. The selected training zone is
displayed.
Scroll with the SPEED (+) button to “Fat Burn”.
Press SET button. The training zone is set for all
future training.
Tip: To exit set mode, press and hold the SET button for 3 seconds to go
back to the training mode.