Sigma SD10 - Setting Auto Power Off

108
AUTO POWER OFF
TO SET AUTO POWER OFF
1
Make sure the camera is turned on.
2
Press the ＜ MENU＞ button on the back of
the camera to display the Camera Set-up Menu.
(See P.96 )
3
Use ＜ ／ ＞ arrows on the 4-way controller
to select “Auto Power Off”.
4
Press ＜
＞
arrow or ＜ OK ＞ to open
sub-menu.
5
Use ＜ ／ ＞ arrows on the 4-way controller
to select desired setting.
6
Press ＜
＞
arrow or ＜ OK ＞ to apply the
setting or
＜ ＞ arrow or ＜ CANCEL ＞ to
close sub-menu without making any changes.