Sigma SD10 - Viewing Image Information

72
VIEWING IMAGE INFORMATION
The Image Info Screen contains additional information about each image.
TO DISPLAY IMAGE INFO SCREEN
Press the
＜ INFO ＞ button from Single-Image,
Contact Sheet, or Zoomed-In View.
While in Image Info Screen:
Press ＜
INFO＞ again or ＜ CANCEL＞ to close the Image Info Screen
and return to the previous view.
Use ＜
／ ／ ／
＞ arrows on the 4-way controller to change the image
selection the same way as in Single-Image View. (See next section for the
exception.)