Sigma SD10 - Using the Ok Button Shortcut

90
USING THE OK BUTTON SHORTCUT
The ＜ OK ＞ button can be used as a shortcut key for locking, marking, or
rotating images. By setting the
＜ OK ＞ button to perform the most
commonly used operation, images can be easily locked, marked, or rotated
with a single button press. Alternatively, the
＜ OK ＞ button shortcut can be
used to temporarily toggle the over-exposure overlay on or off.
TO SET THE ＜ OK ＞ SHORTCUT
1
Press the ＜ MENU ＞ button on the back of
the camera to display the Camera Set-up Menu.
(See P.96 )
2
Use the ＜ ／ ＞ arrows on the 4-way
controller to select “OK Shortcut”.
3
Press the ＜
＞
arrow or ＜
OK＞ to open
the sub-menu.
4
Use the ＜ ／ ＞ arrows on the 4-way
controller to select desired shortcut. Shortcut
options are: None, Lock/Unlock, Mark/Unmark,
Rotate
, Rotate , or Exp. Warning.
5
Press the ＜
＞
arrow or ＜ OK ＞ to apply the
setting or the
＜ ＞ arrow or ＜
CANCEL
＞
to close sub-menu without making any changes.