Sigma SD10 - Page 87

87
MARKING IMAGES
MARKING ALL IMAGES
1
Press ＜ MOD ＞ to display the Modification
Menu.
2
Use the ＜ ／
＞
arrows on the 4-way
controller to select the Mark Menu.
3
Use the ＜ ／ ＞ arrows on the 4-way
controller to select “Mark all”.
• If all images are already marked, the “Mark all”
menu item will not be available.
4
Press ＜ OK ＞ to display the confirmation
dialog.
5
Press ＜ OK ＞ to mark the images or press
＜ CANCEL ＞ to return to reviewing images
without marking.
A flag icon
will appear in the upper-right
corner of all marked images.
TIP
• Select “Unmark all” from the Mark Menu to unmark all marked images on the CF
card.