EasyManua.ls Logo

Sigma sigmaspectrum 35700ABB - Preparing the Pump and IV Sets; Loading an IV Set

Sigma sigmaspectrum 35700ABB
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
SIGMA Manual Number 41018
Revision AR
Figure 10. Pull the adaptor straight out
Do not pull the adaptor at an angle. This could bend the prongs. Do not pull the cord to unplug the
adaptor from the receptacle. Improper twisting or pulling of the connector or cord may damage the
power supply.
Charging the Battery
When the SIGMA Spectrum is connected to the AC Power Adaptor and the adaptor is plugged into
a powered outlet receptacle, the pump’s Standard Battery Pack or Wireless Battery Module will be
charged to full capacity. It is not necessary to turn the pump on.
Refer to “APPENDIX G - Icons” section, beginning on page 91 for a listing of the symbols used and
their description.
Configuring User Options
The Spectrum pump has two sets of configuration options:
User options
BioMed options
NOTE: For a description of the BioMed options, refer to the SIGMA Spectrum
Service Manual.
User Options
To access the User Options menu:
Software version 6.02.00 and earlier
From the Care Area selection screen:
1. Press the HELP softkey.

Table of Contents

Related product manuals