Need help?Do you have a question about the Sigma sigmaspectrum 35700ABB and is the answer not in the manual?
General| Category | Water Pump |
|---|---|
| Model | sigmaspectrum 35700ABB |
| Inlet Size | 1 1/2 inch |
| Outlet Size | 1 1/2 inch |
| Material | Cast Iron |
Details the intended use of the SIGMA Spectrum pump for fluid administration.
Lists other relevant documents for the Spectrum pump, including service manuals.
Provides information on regulatory compliance standards for the SIGMA Spectrum pump.
Offers contact details for technical support and service for the SIGMA Spectrum pump.
Provides visual diagrams of the SIGMA Spectrum pump and its components.
Explains the meaning of labels and symbols found on the SIGMA Spectrum pump.
Instructions for safely unpacking the SIGMA Spectrum pump from its packaging.
Information on using the AC power adaptor for charging the pump's battery.
Details the function and use of the AC Power Adaptor Protector.
Guidance on how to clean the AC Power Adaptor with its protector.
Steps for connecting the AC power adaptor to the pump and a power source.
Instructions on how to properly disconnect the AC power adaptor from the pump.
Explains how the pump's battery is charged using the AC power adaptor.
Guide to setting up user-configurable options for the SIGMA Spectrum pump.
Configuration options for pump alarms, including volume and tone.
Options for customizing the pump's display settings and screen elements.
Accessing and viewing various information screens related to the pump's status.
Step-by-step guide to starting an infusion using the Drug Error Prevention mode.
Instructions for starting an infusion when drugs are not in the library.
Procedures for setting up and performing secondary infusions with the pump.
Detailed steps for correctly loading an IV set into the SIGMA Spectrum pump.
Instructions for safely removing an IV set from the SIGMA Spectrum pump.
Steps to prepare the pump for a secondary infusion setup.
Identifies and explains the function of each key on the pump's interface.
Guide on how to activate a new drug library on the SIGMA Spectrum pump.
Step-by-step instructions for programming infusions using the DEP mode.
Instructions for programming infusions manually using the Basic mode.
Detailed steps for configuring and initiating secondary infusions.
How to switch back to the primary infusion mode from a secondary infusion.
Explanation of the secondary callback feature for clinician notification.
Steps for programming a loading dose for an infusion.
Instructions for administering a bolus dose of medication.
Guide to programming infusions using multi-step sequences.
Procedures for clearing the entire multi-step infusion program.
How to remove a single step from a multi-step infusion program.
Instructions for setting up and using the Cyclic TPN mode for infusions.
How to adjust infusion rates without stopping the pump.
Setting a delayed start time for infusions.
How to stop or cancel an active delayed start timer.
Modifying the delay time for a programmed infusion.
Explains the "Values Differ" display for weight/BSA discrepancies.
General advice and best practices for operating the SIGMA Spectrum pump.
Steps to put the pump into standby mode to prevent inactivity alarms.
How to place the pump in standby when it is stopped without an alarm.
Procedures for checking the patency of the IV line.
Methods for locking and unlocking the pump's keypad.
How to temporarily silence audio alarms on the pump.
Steps to resolve and clear alarm conditions on the pump.
Explains common alarm messages and the required actions to clear them.
Tips to avoid triggering false or unnecessary alarms.
How to handle bolus releases during downstream occlusion events.
Describes the different battery warning levels and their implications.
Details the low battery alarm, its indicators, and actions.
Explains the very low battery alarm and its associated actions.
Information on the battery depleted alarm and pump shutdown.
Lists approved cleaning agents for the SIGMA Spectrum pump.
Step-by-step instructions for cleaning the SIGMA Spectrum pump.
Guidance on proper storage procedures for the pump.
Information on when and how to service the SIGMA Spectrum pump.
Lists compatible SIGMA brand IV sets for specific uses.
Lists compatible SIGMA Y-Type blood sets for blood/saline administration.
Lists Hospira IV sets compatible with the SIGMA Spectrum pump.
Important warnings related to using compatible Hospira IV sets.
Lists Baxter IV sets compatible with the SIGMA Spectrum pump.
Important warnings related to using compatible Baxter IV sets.
Description of the Tandem Carrier accessory for holding multiple pumps.
Description of the 3 Pump Carriers accessory.
Description of the Single-Pole accessory for mounting pumps.
Description of the Multi-Pole accessory for mounting pumps.
Details the AC Power Adaptor Protector accessory.
Description of the Double Rotating Pole Clamp Assembly accessory.
Specifications related to the Drug Error Prevention feature of the pump.
Information on the Master Drug Library (MDL) used for pump configuration.
Details on how to transfer drug libraries to the pump.
Information on standard gravity IV sets compatible with the pump.
Lists applicable industry standards and testing references.
Lists compatible Primary Filter Set Macro IV sets.
Lists compatible Primary Filter Set Minidrip IV sets.
Lists compatible Buretrol Minidrip IV sets.
Lists compatible Y-Type Blood Sets.
Lists compatible Primary Nitroglycerin Sets.
Lists compatible Fat Emulsion Sets.
Details the specifications of the standard and wireless battery modules.
Describes the type of pumping mechanism used in the SIGMA Spectrum pump.
Technical details of the pump's display.
Information on adjustable occlusion pressure settings.
Specifies the operating temperature and humidity ranges for the pump.
Specifies the storage temperature and humidity ranges for the pump.
Lists and describes the various alarms and alerts generated by the pump.
Details the variable alarm volume levels available.
Explains the IV set based anti-free-flow system.
Specifications for the wireless network modules.
Details the wireless security protocols used.
Information on external interfaces and software upgrade methods.
Explains how fluid container height affects pump flow rate accuracy.
Discusses the impact of back pressure on the pump's flow rate accuracy.
Describes the typical start-up flow rate accuracy curve of the pump.
Presents a graph of flow rate over the first two hours of operation.
Shows the flow rate error curve for the second hour of operation.
Displays a graph of flow rate during the last hour of operation.
Shows the flow rate error curve for the last hour of operation.
Graph of flow rate startup at the minimum rate setting.
Flow rate error curve at minimum rate for the second hour.
Graph of flow rate at the minimum rate during the last hour.
Flow rate error curve at minimum rate for the last hour.
Details the time to activation for downstream occlusion alarms.
Information on the bolus volume generated during downstream occlusion events.
Information on the electromagnetic emissions from the SIGMA Spectrum pump.
Details the pump's immunity to electrostatic discharge, transients, and magnetic fields.
Specifies the pump's immunity to conducted and radiated electromagnetic interference.
Recommends separation distances for RF communication equipment.
Step-by-step guide for addressing a low battery condition.
Step-by-step guide for addressing a very low battery condition.
Explains the battery status icons displayed on the pump screen.
Explains icons related to the wireless battery module status.
Explains icons related to wireless network connectivity.
Explains other common icons displayed on the pump's interface.
Instructions for programming infusions based on drug amount and time.
How to adjust priming volume for amount/time infusions.
Instructions for performing a flush operation on the pump.
To Next Page
