18 Operational Overview
SIGMA Manual Number 41018
Revision AR
Secondary Infusions
1. Lower the primary bag at least 20" below the secondary bag.
2. Stop the pump if it is running.
3. Press the REVIEW/PROGRAM softkey.
4. Press the PROGRAM SECONDARY softkey.
5. Select the drug for the secondary infusion.
6. Push OK to select/confirm the secondary bag.
7. Enter all required values on the setup screen.
8. Push RUN/STOP to begin secondary infusion.
9. Check the flow and confirm that drops are falling in secondary and not the primary drip
chamber.
To Next Page
Loading...