22 Programming the Pump
SIGMA Manual Number 41018
Revision AR
LETTERS Press numeric keys once, twice, or three
times to select corresponding letters.
MULTI-STEP Press to access the Multi-Step Programming
Mode.
OK Press to confirm entries and advance cursors.
ON/OFF Press to turn the pump on or off.
OPTIONS Press to select additional pump features.
PROGRAM SECONDARY Press to set up a secondary infusion.
RESET Press to reset the multi-step and cyclic TPN
programs to the start.
REVIEW Press to view the setup screen without
stopping the pump.
REVIEW PRIMARY/REVIEW
SECONDARY
Press to to view and edit values in the setup
screen.
REVIEW PROGRAM Press to display the setup screen when pump
is stopped.
RUN/STOP Press to start or stop the infusion.
SETUP Press to start programming.
SILENCE Press to quiet the audio alarm for 2 minutes.
Additionally, any key can be pressed for
silence.
SOFTKEYS The top row of keys on the keypad are non-
labeled keys with various functions
depending on what is displayed above them.
TAPER DOWN Press to enable a cyclic TPN program to
taper down automatically.
TITRATE Press to change the flow rate without
stopping the pump.
Key Description
To Next Page
Loading...