AFTER SALES SUPPORT
1300 7 77 137
service@unclebills.com.au
MODEL: EA2476 PRODUCT CODE: 715222 03/2024
24
INSTRUCTIONS (CONT.)
Video Settings Menu
Resolution: Select the desired video resolution. You can choose from 1296P (2304 x
1296 30fps), 1080P (1920 x 1080 30fps), 720P (1280 x 720 30fps), 480P (848 x 480 30fps)
and 360P (640 x 360 30fps). Higher resolutions produce higher quality recordings,
however, use more space on your micro SD card. The selected size (resolution) will be
displayed as either 1296P 30, 1080P 30, 720P 30, 480P 30 or 360P 30 on the top centre
of the viewing screen, while in video mode. The videos are recorded in MP4 format
which can be played back on most devices.
Video Length: Select the duration of recording video when the Wildlife Camera
is triggered automatically (in live mode). Select from 5-180 seconds (in 1 second
increments). Note, once you exit the Menu you cannot view the Video Length
selection on the viewing screen. However, you can see the remaining recording time
left on the micro SD card.
Record Audio: If you would like your videos to have sound select ‘On’. If you do not
want your videos to have sound then select ‘Off’.
General Settings Menu
Language: Select this option to change the language. There are multiple languages
available: English, German, French, Polish, Danish, etc.
Default Setting: Select this option to reset the Wildlife Camera to the factory default
settings. Once selected the camera prompts you to select a language and to enter
the current date and time. A final message ‘All data will be deleted’ will appear on the
viewing screen. At this point you can select either ‘Cancel’ or ‘OK’.
NOTE: Once the Wildlife Camera has been restored to the default settings the
language will need to be selected and the current date and time settings will need
to be re-entered.
Format: Select this option to format the micro SD card using the Wildlife Camera. We
recommend formatting the memory card if it has already been used in other devices
or if it is a new card. Always save your files onto a computer or suitable storage device,
before reformatting the micro SD card, as all files on the card will be deleted while the
card is being formatted.
To Next Page
Loading...
