Signode TABLE-TYER - ;14;10 Congratulations; Table of Contents

CONTENTS
Page
Safety Information
3
Specifications
5
Major Components
6
Disconnect & Lockout
8
Electrical Schematic
9
Operation
13
Parts List & Views
15
Spare Parts
41
CONGRATULATIONS
12/14/10
Thank you for purchasing your Table-Tyer Strapping Machine. The Table-Tyer has
been designed to be a reliable, maintenance free strapping machine. The
innovative design of this machine allows for every maintenance part to be
replaced easily and quickly with very little or no instruction.
Considerable effort has been made to ensure that this product conforms to our
high quality standards. However, should you experience any difficulties, please
contact your Signode Representative with your machine model and serial number.
Thank you for your help.
TABLE-TYER
STRAPPING MACHINE
PART NO. 500998
All conditions and options have been
detailed in this manual to guide and alert
operating and service personnel with respect
to safety, operation and maintenance
procedures. A complete parts listing, with
exploded views, has been included in this
manual in the event replacement parts must
be ordered. Please review each section of
this manual before operating your machine.
PLEASE NOTE: Most of the fasteners in this machine are metric. Before removing and replacing any
part, refer to the parts listing to determine the proper tools to use and
the correct size hardware that may have to be replaced.
2