Signode TABLE-TYER - Machine Specifications; Strap Sizes; Package Size; Voltage Specifications

12/14/10
TABLE-TYER, MACHINE SPECIFICATIONS
STRAP SIZES: Signode Empax 1/4" (6mm), 3/8" (9mm), 1/2" (12mm)
PACKAGE SIZE (Minimum): 3 1/2" W x 1-1/2" H
VOLTAGE SPECIFICATIONS:
Rated current:
3A
Rated voltage:
110V
Rated frequency:
6OHz
Type of current:
AC
FAULT PROTECTION: Fused
SYSTEM DISCONNECT: HP Rated switch
OPERATING HEIGHT: Minimum 30-3/4", Maximum 37-1/2"
WEIGHT: 168 lbs.
NOISE EMISSIONS: 55dB
MACHINE DIMENSIONS:
5