SII LP-1010 - Setup Menu Setting Parameter Table

5-3
▼Setting parameter items
Chapter 5 "SETUP" Menu
uneMmetiyhcrareihtsriFmetiyhcrareihdnoceS
PUTES
PUTES
LGPH_nTROP#
)A(otrefeR
)1etoN
PUTES
_nTROP#NACSD
PUTES
FFIT_nTROP#
PUTES
SLAC_nTROP#
PUTES
ARAP#_LGPH
)A(otrefeR
PUTES
ARAP#NACSD_
PUTES
ARAP#FFIT_
P
UTES
ARAP#SLAC_
PUTES
LGPH_BSU#
Note 1)
Disabled ports will not be indicated. (refer to PORT select in the system menu.)
Only the PDL selected via PDL select is displayed. (refer to PDL select in the Protocol
menu.)
Parallel and USB will be indicated only when the respective interfaces are installed.
Setup menu setting parameter table