SII LP-1010 - Routing Table

To Next Page

To Previous Page

12-6

ROUTING TABLE

Specifies the routing table of this device. It is used to connect this device

to a host of other network.

nGATEWAY ADDR

Specifies the Router IP address.

000.000.000.000 to 255.255.255.255

Default value: 000.000.000.000 (not set)

■NETWORK ADDR

Specifies the network address

000.000.000.000 to 255.255.255.255

Default value: 000.000.000.000

◆ If the gateway address is not specified, it is not displayed.

◆ When this setting value is "000.000.000.000," it means the

default routing is specified.

Notes