x
The components, including options, which are included in this device can
be attached to the main unit at the time of device installation. Confirm
that the following components are supplied.
If any components are missing or broken, contact your retailer or your
nearest service center.
Basic components
◆ Plotter unit (1 unit): Built-in system firmware, comes with power
cord.
◆ Process cartridge (1 set)
Accessories
◆ Roll paper (A0, A1, A3 × 1 unit each, for checking at the time of
installation)
◆ Paper flange: 2 to 6 units. :
The number of units varies depending on the paper feeding system.
◆ Toner cartridge (3 units, for checking at time of installation)
◆ Waste bottle (pre-installed, 1 unit)
◆ User's Guide (this manual, 1 copy)
Options
◆ Expansion kit (HDD&I/F) (1 unit): Provided for LP-1010L as a
standard supply.
(for only customers in Japan)
◆ Tray (1 unit)
◆ High-performance stacker (1 unit) (under development)
Supplied components
To Next Page
Loading...