SII LP-1010 - Dscan Self Plot

To Next Page

To Previous Page

8-6

DSCAN SELF PLOT

Executes self-plotting of DSCAN built data format in the device.

◆ The DSCAN format is for only customers in Japan.

<Parameter (choice execution method)> : Default value

PORTn Executes self-plotting based on the setting information of the

PDL table (DSCAN) for the port n of Ethernet.

Note 1)

PARA Executes self-plotting based on the setting information of the

PDL table (DSCAN) for the parallel channel.

Note 2)

Note 1) Disabled ports will not be indicated. If HPGL is

not selected at the time of PDL selection.

Note 2) Parallel and USB will only be indicated when

each interface is installed.

(Sample of print)

Note