12-4
PORT SELECT
Selects the Ethernet port and protocol.
10 ports are expressed in 10 digits on LCD.
Port selectors 1 to 10 selects ports 1 to 10.
<Parameter (choice input method)>
X/L/F/-
X : XPT protocol (XPT: Raw Protocol (socket))
L : LPD protocol
F : FTP protocol
- : Not set
1234567890
(Port select 1-10) Default: XLF–––––––––––
DHCP
Selects whether to enable or disable the DHCP.
<Parameter (choice input method)> : Default value
DISABLE Disables the DHCP.
ENABLE Enables the DHCP.
To Next Page
Loading...