11-7
Chapter 11 "SYSTEM" menu
▼Setting items
30×42 SERIES ROLL
30" (762.0 mm)
MAP SERIES ROLL
700 mm (27.6 inches), 500 mm (19.7 inches)
DIN SERIES ROLL
707 mm (27.8 inches), 500 mm (19.7 inches)
CHINA SEIRIES ROLL
914 mm (36 inches), 910 mm (35.8 inches), 900 mm (35.4 inches),
880 mm (34.6 inches), 620 mm (24.4 inches), 610 mm (24 inches),
450 mm (17.7 inches), 440 mm (17.3 inches), 310 mm (12.2 inches)
<Parameter (choice input method)> : Default value
OFF/ON
◆ The default value varies depending on the INITIAL
SETTING.
◆ All of these parameters cannot be set to OFF.
◆ When this parameter is changed from ON to OFF, the
following related parameters must be initialized.
• MEDIA SERIES in the paper menu
• Automatic paper feed series in the setup menu
Note
To Next Page
Loading...