10 Copyright Silca 2006
SBB Operating Manual - English
SELECTING THE CAR MAKE
- Use the arrow keys to select
the make, then press
ENTER
.
- Press
ESC
to quit.
After selecting the make the display will show the list of car models
.
FUNCTION F1
Press the
“F1”
key to show information relating to the
make/model
selected (type and position of connectors,
procedures, keys, types of transponder, etc.) (see chap. 9 "HELP MENU", page 31).
6.4.1 SELECTING THE CAR MAKE
SBB is not always able to automatically recognize all the immobilizer central units and is therefore unable to
automatically choose the communication procedure to launch. It is therefore
NECESSARY
to select the right
MAKE MODEL
ANY OTHER CHARACTERISTICS
(Petrol, Diesel,
red key system
, etc.)
to which
the specific communication procedure is associated
.
For more information about the car model see the Functions Menu of the specific make.
6.4.2 CAR MODEL NOT ENABLE
If a car model that is not enabled is selected, a beep is heard and the display shows
:
6.4.3 CAR MODEL ENABLED
If a car model that is enabled has been selected, the display shows
:
- Press
ESC
to quit.
- Press
ENTER
to continue.
- VOLKSWAGEN -
BORA (98- )
CADDY (95-99)
CADDY (00- )
> GOLF (95-99)
GOLF (00- )
GOLF CABRIO (95-99)
- VOLKSWAGEN -
Device not enabled
for this model.
Insert password from
menu ENABLE FLAGS
(41)
Insert the key
and turn on
the console
To Next Page
Loading...