16 Copyright Silca 2006
SBB Operating Manual - English
PASSWORD ENTRY
After selecting the enabling level the display will show
:
- Enter the password comprising 6 numerical characters.
- Press ENTER to continue, ESC to quit.
WRONG PASSWORD
If the Password entered is wrong the user is warned by a beep and the display will show:
- Repeat the operation.
ATTENTION:only 3 attempts are allowed, after which the device is blocked. To release disconnect the device
from the power supply, then re-connect.
RIGHT PASSWORD
If the Password entered is right, the display will show:
From this moment the device is enabled to operate at the enabling level selected
.
ENABLING TOKEN
After selecting the “TOKEN” menu the display will show:
XX = Tokens still available
YY/YY/YYYY = Date of last loading of tokens
F5 = Function key for unloading tokens from the smart card
ENABLING MAKES
Insert Password
for activation
LEVEL X
XXXXXX
PASSWORD
ABILITATION GROUP
CAR BRAND
WRONG
ABILITATION GROUP
CAR BRAND
ENABLED
- ENABLING TOKEN -
TOKEN AVAILABLE
XX
Date of last loading
YY/YY/YYYY
To Next Page
Loading...